How-to Guides

There are may ways tools can be sharpened, depending on the type of tool.

For tips on how to sharpen your pruners and axes, see our Cyclone Tool Care video below.

1. Tie cord off around the plastic loop (red)
2. Take cord down to the first rolling hinge and loop cord around it (blue)
3. Pull cord back up and loop around the first top rolling hinge (orange)
4. Take cord back down and loop around the final rolling hinge (green)
5. Pull cord back up and loop around the final top rolling hinge (yellow)
6. Let excess cord hang & move the ball into your preferred position  (purple)

24” Bow Saw and Blade (656811)
Twist the black end of the handle to release the blade and carefully unhook the blade from pegs.  Replace with new blade by aligning the holes with the pegs, twist black handle again to secure and tighten.

21” Bow Saw (656804)
To release the blade, pull down the lever blade tensioner and carefully unhook blade from pegs.  Replace with new blade by aligning holes with the pegs and push lever up to secure and tighten. 

If you require further assistance, please contact our friendly customer experience team on 1300 241 732.